NiMo 催化剂上MoS2 形貌与其DBT 加氢脱硫选择性的关系

制备了两个系列不同镍钼负载量的NiMo 催化剂,并用X 衍射、N2 物理吸附和透射电镜进行了表征。以二苯并噻吩
为模型硫化物,在高压固定床微型反应器上对该NiMo 催化剂的加氢脱硫性能进行了评价,研究了MoS2 形貌与催化剂加氢脱
硫选择性之间的关系。结果表明,镍钼负载量对MoS2 形貌有明显的影响。Mo18Ni4 催化剂(含18% MoO3 和4% NiO)上
MoS2 呈多级层状结构,具有较高的加氢脱硫活性和优异的加氢脱硫选择性。加氢选择性与催化剂上活性组分MoS2 的堆积层
数相关联呈很好的线性关系;堆积层数越多,其加氢选择性也越高。     

Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)

The effect of crystal polymorphism on barrier and mechanical properties of PLLA is detailed in this contribution. PLLA films containing different amounts of α and α′ crystal forms were prepared by annealing quenched PLLA at different temperatures. The polymorphic structure of the films was analyzed by X-ray diffraction. Mechanical properties and permeability to water vapor were investigated as a function of degree of crystallinity (w_C) and related to crystal polymorphism developed during annealing. The polymorphic structure of PLLA significantly affects mechanical and barrier properties. The α crystal modification provides a better barrier to water vapor and a higher Young’s modulus, compared to films containing the α′ modification, but a lower elongation at break. The varied barrier and mechanical properties were correlated to the different packing of PLLA chains in the two analyzed polymorphs. The conformational disorder of the α′ form makes this structure a mesophase (condis crystal), with remarkable effects on material properties.     

Polyynes from Toona ciliata var. ciliata and Related Cytotoxic Activity

A phytochemical investigation of Toona ciliata var. ciliata afforded three new polyynes, 1 – 3 . Their structures were elucidated on the basis of spectroscopic analysis and chemical methods. Only compound 3 exhibited potent cytotoxicity against the HL‐60 cell line with an IC₅₀ value of 6.7±0.27 μM .     

Spherical Periodic Mesoporous Organosilicas Bearing Camphorsulfonamide Substructures for HPLC

New mesoporous organic?Cinorganic spheres were prepared by one step co-condensation of trialkoxysilylated camphorsulfonamide (CSA) and 1,2-bis(triethoxysilyl)ethane (BTSE) using octadecyltrimethylammonium chloride (C₁₈TMACl) as template and ethanol as co-solvent in basic medium. The materials have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), nitrogen sorption measurement, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and elemental analysis (EA). Then the mesoporous organic?Cinorganic spheres were demonstrated to be novel packing materials for potential application in the normal-phase high performance liquid chromatography (HPLC).     

Flash memory effects based on styrene/maleimiade copolymers with pendant azobenzene chromophores

Two styrene/maleimiade copolymers with pendant azobenzene chromophores, poly(styrene-1-(4-phenylazo-phenyl)-pyrrole-2,5-dione) (PS-DP) and poly((4-vinyl-benzyl)-9H-carbazole-1-(4-phenylazo-phenyl)-pyrrole-2,5-dione) (PVCz-DP), were synthesized. The polymeric memory devices based on each of the two polymer films (ITO/Polymer/Al) show similar rewritable flash memory behaviors but different transition voltages. By introduction of carbazole groups in the polymer side chains, the voltage difference from OFF to ON state of ITO/PVCz-DP/Al is reduced obviously in comparison with that of ITO/PS-DP/Al, which is beneficial to the protection of devices. Both ITO/PS-DP/Al and ITO/PVCz-DP/Al show high stability under a constant stress or continuous read pulses voltage of 1.0 V. The memory mechanism is governed by space-charge limited conduction (SCLC) on the basis of the I–V curves of these fabricated memory devices. With excellent flash memory characteristics and simple processability, the memory devices fabricated with these two styrene/maleimiade copolymers have potential applications for the future electronic memory devices.     

Three New Diterpenoids from Isodon nervosus

Three new ent‐kaurane diterpenoids, rabdonervosins D–F ( 1 – 3 ), were isolated from the leaves and stems of Isodon nervosus. Their structures were elucidated on the basis of spectroscopic methods including 1D‐ and 2D‐NMR analyses. Compounds 1 – 3 were evaluated for their cytotoxicity against HepG2, CNE2, PC‐9/ZD, HeLa, MCF‐7, and HCT116 cell lines. No compounds exhibited potent cytotoxicity.     

Aqueous biphasic systems involving alkylsulfate-based ionic liquids

The specific effects of K₃PO₄, K₂CO₃, Na₂CO₃, and (NH₄)₂SO₄, as high charge-density inorganic salts and thus inducers of the formation of aqueous biphasic systems (ABS) containing several ethyl-methylimidazolium alkylsulfate ionic liquids, C₂MIM C_nSO₄ (n = 2, 4, 6, or 8), have been assessed at T = 298.15 K. The results are analyzed in the light of the Hofmeister series. The influence of different alkyl chain lengths in the anion, together with the ability of the selected inorganic salts to induce the formation of ABS, is discussed. Phase diagrams have been determined through turbidimetry, including tie lines assignments from mass phase ratios according to the lever – arm rule. The Merchuck equation was satisfactorily used to correlate the solubility curve.     

Tunable synthesis of propylene glycol ether from methanol and propylene oxide under ambient pressure

A series of basic and acidic ionic liquids, 1-butyl-3-methylimidazolium hydroxide (BMIMOH), 1-acetyl-3-methylimidazolium chloride (AcMIMCl) and AcMIMCl-FeCl₃, or analogues of AcMIMCl, namely 1-potassium acetate-3-methylimidazolium chloride (KAcMIMCl), 1-potassium (sodium, ammonium) acetate-3-methylimidazolium hydroxides (KAcMIMOH, NaAcMIMOH and NH₄AcMIMOH), were prepared and used as catalysts for catalytic synthesis of propylene glycol ether via reaction of propylene oxide (PO) with methanol under mild reaction conditions. KAcMIMOH exhibited outstanding catalytic performance with 94.2% of conversion of PO and 99.1% of selectivity to 1-methoxy-2-propanol (MP-2) at 60°C and ambient pressure for 4 h. However, AcMIMCl-FeCl₃ showed a good catalysis performance with high selectivity to 2-methoxy-1-propanol (MP-1). The tunable synthesis of MP-2 or MP-1 catalyzed by basic compound KAcMIMOH or acidic ionic liquid AcMIMCl-FeCl₃ was realized.     

The use of 1-phenyl-3-methyl-4-benzoyl-5-pyrazone as chemical modifier for low-temperature electrothermal vaporization for separation and determination of Cr(III) and Cr(VI) by ICP-MS

Based on thermal stability and volatility of 1-phenyl-3-methyl-4-benzoyl-5-pyrazone (PMBP) chelate, a novel method was described for the determination of Cr(III) and Cr(VI) by low-temperature electrothermal vaporization (LETV) combined with inductively coupled plasma mass spectrometry (ICP-MS). It was found that Cr(III) could be rapidly formed in a graphite furnace, and quantitatively vaporized into ICP at a relatively low temperature of 1000 °C with the use of PMBP as a chemical modifier, while Cr(VI) was retained in the graphite tube. Thus, the separation of Cr(III) and Cr(VI) could be realized. The main factors affecting the formation and vaporization of Cr(III)-PMBP chelate were investigated in detail. Under the optimized conditions, the detection limit of Cr(III) for this method was 0.031 ng mL⁻¹ and the relative standard deviation (RSD) for 1.0 ng mL⁻¹ Cr(III) was 5.3% (n = 9, v = 10 μL). The linear range of calibration curve spanned three orders of magnitude. The proposed method was applied to the determination of Cr(III) and Cr(VI) in water samples with satisfactory results.     

Melting temperature evolution of non-reorganized crystals. Poly(3-hydroxybutyrate)

In the present study the correlation between the melting behaviour of poly(3-hydroxybutyrate) (PHB) original, non-reorganized crystals and the crystallinity increase during isothermal crystallization is presented and discussed. Since the reorganization processes modify the melting curve of original crystals, it is necessary to prevent and hinder all the processes that influence and increase the lamellar thickness. PHB exhibits melting/recrystallization on heating, the occurring of lamellar thickening in the solid state being excluded. The first step of the study was the identification of the scanning rate which inhibits PHB recrystallization at sufficiently high T_c. For the extrapolated onset and peak temperatures of the main melting endotherm, which is connected to fusion of dominant lamellae, a double dependence on the crystallization time was found. The crystallization time at which T_onset and T_peak change their trends was found to correspond to the spherulite impingement time, so that the two different dependencies were put in relation with primary and secondary crystallizations respectively. The increase of both T_onset and T_peak at high crystallization times after spherulite impingement was considered an effect due to crystal superheating and an indication of a stabilization process of the crystalline phase. Such stabilization, which produces an increase of the melting temperature, is probably connected with the volume filling that occurs after spherulite impingement.